P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
  • Load image into Gallery viewer, P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
  • Load image into Gallery viewer, P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
  • Load image into Gallery viewer, P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
  • Load image into Gallery viewer, P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
  • Load image into Gallery viewer, P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL
  • Load image into Gallery viewer, P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL

P2A 2L/min SST Peristaltic Pump Touchscreen Controller ETL

Vendor
Across International
Regular price
$1,770.00 USD
Sale price
$1,770.00 USD
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

A peristaltic pump, also commonly known as a roller pump, is a type of positive displacement pump used for pumping a variety of fluids. The fluid is contained within a flexible tube fitted inside a circular pump casing (though linear peristaltic pumps have been made). A rotor with a number of "rollers", "shoes", "wipers", or "lobes" attached to the external circumference of the rotor compresses the flexible tube. As the rotor turns, the part of the tube under compression is pinched closed (or "occludes") thus forcing the fluid to be pumped to move through the tube. Additionally, as the tube opens to its natural state after the passing of the cam ("restitution" or "resilience") fluid flow is induced to the pump. This process is called peristalsis. Typically, there will be two or more rollers, or wipers, occluding the tube, trapping between them a body of fluid. The body of fluid is then transported, at ambient pressure, toward the pump outlet. Peristaltic pumps may run continuously, or they may be indexed through partial revolutions to deliver smaller amounts of fluid.

Specifications

 Model  P2A
 Electrical requirements
 110V-230V, with auto intelligent voltage recognition
 50/60Hz, 1-Phase 50 watts
 Power cord  110V US 3-prong (comes with purchase)
 230V cord (available upon request)
 Pumping rate
 2.3L/min (0.6 gallon/min)
 Max. rotation speed  600 rpm (at 0.1 rpm step)
 Pump head
 Y15

 Max. tubing size

 1/2"

 Controller

 Type: color LCD, touchscreen
 Distribution: 0 to 9999 times
 Distribution timer: 0.1 second to 9999 minutes
 Distribution interval: 0.1 second to 9999 minutes

 Fluid retainment

 Pump roll back: 10 to 720 degrees (at 1 degree step)
 Speed: 10 to 300 rpm
 Working temperature  0 to 40°C, < 80% humidity
 IP rating
 IP31
 Communication port  Included: Remote on/off switch
 Optional: RS485, 0-5V, 0-10V, 4-20mA input.
      PLC control of pump's start, stop, speed and rotation directions.
 Unit/shipping dimensions (WxDxH)
 7 x 13 x 9" / 12 x 19 x 13"
 Unit/shipping weight
 15 Lbs
 Compliance
 ETL tested to UL and CSA standards
 Warranty  One year