The Ai 2nd Gen -40°C/F T40 cold traps are ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
PLEASE USE OUR CONTACT US LINK FOR ADDITIONAL SIZES AND OPTIONS
Ai T40-UL -40°C/°F cold trap features
- Comes with Lab Society stainless steel trap
- No dry ice or liquid nitrogen needed
- All steel housing for durability
- Small footprint, built-in swivel casters for mobility
- Plug and play, no assembly required
- ETL tested to UL and CSA standards
Specifications
| Model | T40-UL |
| Electrical requirements |
110V or 220V, 60Hz 1-PH |
| Compressor | Make: Embraco Refrigerant: R404A (220g) Cooling capacity: @ -10°C: 300W @ -20°C: 250W @ -30°C: 150W @ -40°C: 50W |
| Reservoir |
Volume 1.3 gallon (5 liters) Dimensions Diameter 6 1/4 inches Depth: 9 1/2 inches |
| Temperature |
-40°C (-40°F) Display: digital Unit: °C Sensor: PT100 |
| Finish |
Exterior: powder coated steel Interior: polished type 304 stainless steel |
| Trap | Material: stainless steel Make: Lab Society Connection: KF25 x 2 Construction: 6 tier mesh pates, silicone insulating ring |
| Recommended coolant | 50% Ethylene glycol + 50% purified water |
| Unit/shipping weight |
105 lbs / 145 lbs |
| Unit/shipping dimensions |
13 x 18 x 26" / 18 x 23 x 38" (WxDxH) |
| Compliance | UL 471:2010 Ed.10+R:08Dec2016 CSA C22.2#120 Issued: 2013/03/01 Ed: 4 Refrigeration Equipment |
| Warranty | One year |